Estimating Naturally Fractured Oil Reservoir Properties Using Well Testing Techniques: Case Study Ekofisk Oil Field in Norway
DOI:
https://doi.org/10.46717/igj.2025.58.1D.6Keywords:
Fracture reservoir; Dual porosity; Permeability; Well test; Diffusivity equationAbstract
The conductivity of the fracture network often controls production from a reservoir with fractures, and this conductivity can vary as a result of variations in reservoir pressure. A fracture network of channels interlaced with a primary intergranular matrix makes up a fractured reservoir, a dual property system that has two distinct features: fracture and matrix. Models with uniform dual porosity can be used to imitate the uneven fissures found in naturally fractured reservoirs. The dual porosity and dual permeability models are two different models of fracture systems. The well-testing methodology is the most common method for characterizing a fractured reservoir during production. It is a set of analytical procedures based on pressure response to time and place, assessed using conventional diffusivity equation solutions. It is an inverse issue in petroleum engineering in which sets of inputs and outputs are known, and the researcher or analyst seeks the controlling system attributes. Rubis software has been employed to create a model that simulates the sort of naturally fractured reservoir seen in Norway's Ekofisk oil field. We collected the pressure at the wellbore reaction during production and closing to examine using Saphir. The conventional models provided by commercial software were deemed inadequate to examine all of the additional complex responses, we conclude observed throughout the case study; They exhibit similar behavior and could be described using a variety of approaches.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 The Iraqi Geological Journal

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.


