Application of Electrical Tomography (ERT) and GPR Methods to Investigate the Features in Babylon Archaeological City, Iraq

Authors

  • Hind A. Al-Assadi Applied Geology Department, College of Science, University of Babylon, Babylon, Iraq
  • Najah A. Abd Geology Department, College of Science, University of Baghdad, Baghdad, Iraq

DOI:

https://doi.org/10.46717/igj.2025.58.2F.9

Keywords:

Archaeology; Electrical resistivity; Survey; Excavation; Babylonia

Abstract

This study attempts to investigate the artifacts' features in the Babylon Archeological City in Iraq. The Electrical Resistivity Tomography and Ground Penetrating Radar methods were used in this investigation. The Wenner-Schulmberger and Dipole-Dipole arrays were used in this study. However, the dipole-dipole array was used to assess the subsurface resistivity distribution rather than the Wenner-Schlumberger one. This configuration is known for its ability to provide detailed horizontal resolution, making it suitable for identifying the depth and extent of buried structures such as walls, subsurface channels, and other geological features. Several resistivity anomalies were observed, and their sources were interpreted to be located at depths ranging from 1 to 5 m for most sections in the central parts to the northern side of the map. The anomalies in archaeological studies, particularly in geophysical surveys such as Electrical Resistivity Tomography and Ground Penetrating Radar methods, typically refer to unusual readings or patterns which detected in the ground, which might indicate the presence of buried walls or other archaeological features.

Downloads

Published

2025-12-31